Klean Strip Premium Paint Stripper
Oct 12, 2010 (Updated Oct 12, 2010)
Review by Dusty Nichols
Rated a Very Helpful Review
Pros:Strips multiple layers in 15 minutes or less, clings to vertical surfaces, easy clean up
Cons:Eye and skin irritant. Vapors can be harmful.
The Bottom Line: An excellent product for removing multiple layers of paint, epoxy and polyurethane.
Always read directions/instructions before using paint strippers and use common sense. Keep away from children.
Recommend this product?
My bathroom vanity needed a face lift before installing a new granite under mount sink and Price Pfister faucet so my product of choice was Klean Strip KS-3 Premium Stripper which was purchased from Walmart for around $9.
This powerful stripper removes multiple layers of latex and oil-based paints, polyurethane, epoxy, varnish and shellac from wood, metal and masonry surfaces and removes these coatings in 15 minutes or less.
Contains Methanol and Methylene Chloride. If exposed to methylene chloride, you are at increased risk of developing cancer, adverse effects on the heart, central nervous system and liver, and skin or eye irritation. Exposure may occur through inhalation, by absorption through the skin, or through contact with the skin.
How to use:
Wear gloves and chemical splash goggles. Shake can well and slowly open can to relieve pressure.
I'd removed the doors and drawers on my vanity and laid them on an old picnic table on my back porch. After pouring around 2 cups of the clear paste in an old metal bowl, I used a paint brush to spread it on the diagonal of the wood. Within a few minutes, the old paint was bubbling and it wasn't long before I could remove it with a putty knife. Actually, it practically fell off. Once the old paint was removed, I sanded the doors with my Hitachi sander. Working outside with the stripper was easy and I was quite pleased with the results.
Working inside presented a couple of problems. One, I worked in old shorts and was barefooted (my usual attire). Two, I became over confident and was rather lazy about allowing the stripper to get on my skin. It will burn and it does hurt so pay attention to all precautions. I'm still dealing with an ugly burn on my leg and wish I'd practiced safety measures strongly suggested on the can.
The bathrooms fan was running and the door was left open. It's important to work in well ventilated areas. I'm serious about this stuff, pay attention to all warnings!
After protecting my flooring with an old (hotel) curtain, I started applying the stripper to the base of the vanity. The paste does cling to vertical services without runs or drips so Klean Strips claim is right on when it comes to this. You just have to remember not to allow the paste to drop on exposed skin or get on your skin at all, and if it does land on your skin, immediately wash it off. I only rubbed mine off (I did wear gloves so my hands were protected) and I thought that was it. I thought wrong.
As for the results of the stripper on the old paint, it was excellent! It only takes around 15 minutes (or less) for the paint to bubble to such a degree you can scrape it right off. As you scrape, immediately transfer the wet strips of paint to an old Walmart bag (or whatever). Clean as you go and save yourself some extra work later on.
If you don't use all of the paste you've poured in your bowl, transfer it back to the container and clean any tools you used with soap and water. Store container in cool place. After its been opened, you can store it for 6 months, but I've noticed the can expands and needs "burping," after a few hours. This worried me so I left the opened can outside so the paste could dry out. I had no further use for it and had no intention of keeping what was left over.
May be fatal or cause blindness if swallowed. Vapor harmful. Eye and skin irritant. Contact poison control center, or emergency room, if swallowed.
In case of skin contact, irritation may result (I have a burn) so immediately wash with soap and water. Seek medical attention if irritation persists.
Final recommendation and thoughts:
Klean Strip Premium Stripper does an excellent job of removing multiple layers of latex, polyurethane, varnish and shellac in 15 minutes or less. I have a healthy respect for this stuff and should you choose to use it (and I do recommend it), respect it, protect your body from the substance and harmful vapors.
P.O. Box 1879
Memphis, TN 38101
Call the experts at 1-800-398-3892, or email at firstname.lastname@example.org
Product information: www.kleanstrip.com
ddustyrose October 12, 2010
Thanks so much to Dawn (dlstewart) for adding this to the data base for me so quickly.
Read all comments (4)
Share this product review with your friends
Shop for Cleaning at The Home Depot. Klean-Strip KS-3 Premium Stripper is the most powerful stripper for the toughest jobs. It strips multiple layers ...
Features: Klean-Strip QKIM34630 Paint Thinner QKIM34630 Dimensions: -Overall Height - Top to Bottom:4.56 -Overall Width - Side to Side:7.38 -Overall D...
Klean Strip Lacquer Thinner is a high solvency, medium drying thinner for lacquer. Lacquer Thinner is also excellent for cleaning brushes and equipmen...
ABTMGuy store Klean-Strip Fiberglass Paint Stripper - GAF354 Fiberglass Paint Remover is formulated to remove paint from fiberglass. This formula has ...
Shop for Appliances at The Home Depot. Klean-Strip 1-K kerosene is refined to lower the sulfur content, improving air quality and extending wick life....
Klean Strip QSL26 Denatured Alcohol 1Qt @6 (Pack of 6)
Klean-Strip Aircraft Peeler Clearcoat & Basecoat Remover - EFS459 Solves Your Delamination Problems Base coat / clear coat remover Pops factory delams...
This strong, fast acting solvent is a thinner and remover for specified coatings, including polyester and epoxy resins, ink, adhesives and contact cem...
Shop for Heating, Venting & Cooling at The Home Depot. Klean-Strip1-K Kerosene is refined to lower the sulfur content, improving air quality and exten...